Pioneer DEH-P3370XM UC 설치 매뉴얼 - 페이지 4

{카테고리_이름} Pioneer DEH-P3370XM UC에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer DEH-P3370XM UC 4 페이지. Pioneer deh-p3370xm: install guide

Installation

DIN Rear-mount

Installation using the screw holes on the side of the unit

1. Remove the frame. (Fig. 9)

Frame

Insert the release pin into the hole in

the bottom of the frame and pull out

to remove the frame.

(When reattaching the frame, point

the side with a groove downwards

and attach it.)

2. Fastening the unit to the factory radio mounting bracket.

(Fig. 10) (Fig. 11)

Select a position where the screw holes of the bracket and

the screw holes of the head unit become aligned (are fitted),

and tighten the screws at 2 places on each side. Use either

truss screws (5 8 mm) or flush surface screws

(5 9 mm), depending on the shape of the screw holes in

the bracket

Factory radio mounting bracket

Fixing the Front Panel

If you do not operate the Detaching and Replacing the Front Panel Function, use the sup-

plied fixing screws and holder to fix the front panel to this unit.

1. Attach the holder to the front panel. (Fig. 12)

2. Replace the front panel to the unit. (Fig. 13)

Fig. 9

3. Fix the front panel to the unit using fixing screws. (Fig. 14)

Fig. 10

Screw

Dashboard or Console

Fig. 11

Installing the Tuner Unit

Mounting with Brackets (Fig. 15)

Fig. 12

Fig. 13

Fixing screw

Fig. 14

Tapping screw (4 12 mm)

Screw (4 6 mm)

Bracket

Car mat or chassis

Drill 2 to 2.5 mm diameter holes.

Fig. 15