Pioneer 9601G Manuel d'instruction - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Pioneer 9601G. Pioneer 9601G 13 pages. Mp5&fm receiver 7.0 inch tft lcd & manual telescopic
Imprimer la page
SPECIFICATIONS
FM TUNER
Frequency Range 87.5-108MHz
Sensitivity 10 dBu
I.F. Frequency 10.7MHz
Frequency Response 80Hz-12kHz (±3dB)
Stereo Separation >25dB
S/N Ratio >50dB
GENERAL
Power Supply Voltage 12 V DC, Negative Ground
Max Current Consumption 15 A
Max Output Power 4x55W
Note: Specifications and the design are subject to possible modification without notice
due to improvement.
F&Q:
1. Language Setting: Setting- Language
2. Why can't watch video, showing 'video warning'?
Please click 'Setting - other - video warning' and turn 'video warning' off.
3. Why can't use GPS?
Please try to re-activate the SD map card.
Steps:
(1). Remove the SD card, make sure there is no dust on it, and put it back in the unit
(2). Click "Navigation/GPS - Setup - Navi Path" - "Primo" - "Primo.exe" - "Load Map
Automatically" - "".
(3). Return to the home page and click "Navigation" to load the map, start to use it
(4) If the map is still empty, click on the map to show "+"and "-" button, click "+" to
magnify the map until it shows streets
4. Why the car radio shows "No Signal" when I'm reversing?
If the camera can light up when it connect to power, the camera can work. Then please
check if the camera's lines are wired correctly, exactly as written in "camera wiring".
Service
Any question or problem, please contact us via [email protected].
We will respond within 24 hours.
P. S. If possible, photos or video can help us to confirm the problem faster.