Pioneer 9601G Gebruiksaanwijzing - Pagina 5

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Pioneer 9601G. Pioneer 9601G 13 pagina's. Mp5&fm receiver 7.0 inch tft lcd & manual telescopic

Pagina afdrukken

SPECIFICATIONS

FM TUNER

Frequency Range 87.5-108MHz

Sensitivity 10 dBu

I.F. Frequency 10.7MHz

Frequency Response 80Hz-12kHz (±3dB)

Stereo Separation >25dB

S/N Ratio >50dB

GENERAL

Power Supply Voltage 12 V DC, Negative Ground

Max Current Consumption 15 A

Max Output Power 4x55W

Note: Specifications and the design are subject to possible modification without notice

due to improvement.

F&Q:

1. Language Setting: Setting- Language

2. Why can't watch video, showing 'video warning'?

Please click 'Setting - other - video warning' and turn 'video warning' off.

3. Why can't use GPS?

Please try to re-activate the SD map card.

Steps:

(1). Remove the SD card, make sure there is no dust on it, and put it back in the unit

(2). Click "Navigation/GPS - Setup - Navi Path" - "Primo" - "Primo.exe" - "Load Map

Automatically" - "".

(3). Return to the home page and click "Navigation" to load the map, start to use it

(4) If the map is still empty, click on the map to show "+"and "-" button, click "+" to

magnify the map until it shows streets

4. Why the car radio shows "No Signal" when I'm reversing?

If the camera can light up when it connect to power, the camera can work. Then please

check if the camera's lines are wired correctly, exactly as written in "camera wiring".

Service

Any question or problem, please contact us via [email protected].

We will respond within 24 hours.

P. S. If possible, photos or video can help us to confirm the problem faster.