Pioneer SPH-10BT Instructions pour la mise à jour du micrologiciel - Page 5
Parcourez en ligne ou téléchargez le pdf Instructions pour la mise à jour du micrologiciel pour {nom_de_la_catégorie} Pioneer SPH-10BT. Pioneer SPH-10BT 6 pages. Smartphone receiver
Également pour Pioneer SPH-10BT : Manuel d'installation (33 pages), Instructions pour la mise à jour du micrologiciel (4 pages), Manuel d'utilisation (35 pages), Instructions pour la mise à jour du micrologiciel du système (7 pages)
Imprimer la page
The receiver will reboot after the update is finished. Do not touch anything even when the screen is
12.
blacked out. After it has finished rebooting, the screen will return to Source OFF.
13.
The firmware update is now complete. Your Pioneer Smartphone Receiver is now ready for use.
Verify that the firmware has been updated
Perform the same procedure for "Displaying the firmware version" to check that the firmware has been
updated.
Procedure:
1.
Start the vehicle engine (in an open, well-ventilated area).
2.
If AV Source is on, press and hold SOURCE(MUSIC)/OFF to set the unit Source OFF
3.
If Pioneer Smart Sync is connected, disconnect.
4.
Press and hold Application Launch to display the "Initial" menu, then press to confirm.
5.
Press> repeatedly to select "UPDATE, then press Application Launch to confirm.
6.
Select the "S/W VER" to confirm the system info.