Pioneer SPH-10BT 펌웨어 업데이트 지침 - 페이지 5
{카테고리_이름} Pioneer SPH-10BT에 대한 펌웨어 업데이트 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer SPH-10BT 6 페이지. Smartphone receiver
Pioneer SPH-10BT에 대해서도 마찬가지입니다: 설치 매뉴얼 (33 페이지), 펌웨어 업데이트 지침 (4 페이지), 운영 매뉴얼 (35 페이지), 시스템 펌웨어 업데이트 지침 (7 페이지)
페이지 인쇄
The receiver will reboot after the update is finished. Do not touch anything even when the screen is
12.
blacked out. After it has finished rebooting, the screen will return to Source OFF.
13.
The firmware update is now complete. Your Pioneer Smartphone Receiver is now ready for use.
Verify that the firmware has been updated
Perform the same procedure for "Displaying the firmware version" to check that the firmware has been
updated.
Procedure:
1.
Start the vehicle engine (in an open, well-ventilated area).
2.
If AV Source is on, press and hold SOURCE(MUSIC)/OFF to set the unit Source OFF
3.
If Pioneer Smart Sync is connected, disconnect.
4.
Press and hold Application Launch to display the "Initial" menu, then press to confirm.
5.
Press> repeatedly to select "UPDATE, then press Application Launch to confirm.
6.
Select the "S/W VER" to confirm the system info.