Pioneer SX-980 Manuel d'utilisation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer SX-980. Pioneer SX-980 22 pages. Am/fm stereo receiver
Également pour Pioneer SX-980 : Manuel d'utilisation (28 pages)

Imprimer la page

FONE

-- FOR USE IN UNITED KINGDOM OR AUSTRALIA

CAUTION 240V

nected to the terminal which is marked with the |

Mains supply voltage is factory adjusted at 240

letter L or coloured brown or red.

volts.

The AC Outlets of this apparatus have been re-

moved from this apparatus in order to comply

WARNING

with U.K. Safety Regulation. Ensure that your

THIS APPARATUS MUST BE EARTHED.

equipment is connected correctly—if you are in

IMPORTANT

doubt, consult a qualified electrician.

The wires in this mains lead are coloured in ac-

Do not unscrew the bottom plate and cabinet.

;

No user serviceable parts inside.

th the foll

de:

;

ree ht Nae.

Always disconnect all the equipment

from the

;

mains

supply

when

disconnecting

the

signal

Blue:

Neutral

leads. The Power cord should be connected last,

make sure that the Power switch is OFF. Be sure

the appliance connector is fully inserted into the

AC inlet.

Unplug the set from the wall socket when it is

not to be used for an extended period of time.

Brown:

Live

As the colours of the wires in the mains lead of

this apparatus

may

not

correspond

with

the

coloured

markings

identifying the terminals in

your plug proceed as follows.

The

wire

which

is coloured

green-and-yellow

must be connected to the terminal in the plug

FOR YOUR SAFETY

which is marked by the letter E or by the safety

1. Insert this plug only into effectively earthed

earth symbol ~

or coloured green or green-and-

three-pin plug-socket outlet.

yellow.

2.If any

doubt

exists regarding the earthing,

The wire which is coloured blue must be con-

consult a qualified electrician.

The wire which is coloured brown must be con-

INSTALLATION

CAUTIONS

Location liable to downgrade performance

Resulting

trouble

and result in breakdowns

Locations exposed to direct sunlight, or near heaters.

1. External

heat causes

the performance

of the circuit

parts to

deteriorate, and operation becomes unstable.

Locations

with

poor

ventilation,

or with

high humidity

2. Cause

of faulty contact

in input/output

terminals, and rust.

moisture contents, or dusty locations.

High humidity and a high moisture content cause deterioration

in insulation. There is also the danger of current leakage and

heat generation

in the circuit parts. Dust or grease in the rotat-

ing parts causes the parts to deteriorate.

Locations susceptible to vibration.

3. These locations affect the precision parts adversely.

Locations where an AM

radio or TV set is being used simulta-

Mutual

interference can occur from the oscillator circuits used

neously.

in these products.

Don't put anything on the top of the receiver because high power receiver will produce a lot of heat. Also leave sufficient

around the receiver for adequate ventilation.

mae ee