Pioneer PD-S701 Manuel d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer PD-S701. Pioneer PD-S701 22 pages. Compact disc player
Également pour Pioneer PD-S701 : Manuel d'utilisation (32 pages)

Imprimer la page

CONNECTIONS

Output cabie

$761

PD-S

Rod

TAO

Power cord

CD-DECK SYNCHRO cord

Optical fiber cable

Control cord

DIGITAL

INEUT

(Contre

Our

OPTICAL

0000

re)

Stereo amplifier

Cassette deck

CD-DECK

SYNCHRO.

Make

sure that all of the components

are turned off before

making connections.

CONNECTING THE OUTPUT CABLE:

[PD-S$801}

Connect the LINE OUT jacks of this unit to the input jacks (CD or

AUX) of the amplifier. Make sure that the white plugs are connected

to the left (L) jacks and the red plugs to the right (R} jacks.

Be sure not to connect this unit to the amplifier's PHONO jacks,

as sound will be distorted and normal playback will not be possible.

[PD-S701]

The unit is equipped with two sets of output connectors in order to

provide VARIABLE and FIXED output levels. Connect the appropriate

set of connectors to your amplifier's INPUT connectors.

The two

sets of connectors

can

also be used

to connect

the player

simultaneously to two stereo amplifiers.

@ When the VARIABLE jacks are used: The sound outputlevel can

be adjusted using the PHONES/LINE

LEVEL control or the

QUTPUT LEVEL buttons on the remote control unit.

When the FIXED jacks are used: The sound output level remains

fixed; the PHONES/LINE LEVEL control and the OUTPUT LEVEL

buttons on the remote control unit have no effect.

CONNECTING THE OPTICAL FIBER CABLE

This unit can be connected to an amplifier equipped with an optical

digita! jack.

1. Remove

the protective

dust cap from this unit's OPTICAL

DIGITAL OUT jack.

2, Use an optical fiber cable to connect the OPTICAL DIGITAL OUT

jack of this unit to the optical digital input jack of the amplifier.

e@ Align the plug of the optical fiber cable with the optical digital jack

and fully insert the plug to make a secure connection.

Use a separately sold optical fiber cable for the optical digital jack

connections. However, when making optical digital connections, this

player can only be connected to an amplifier which uses the same

type of optical transmission/reception module.

Precautions concerning use of optical fiber cables

Fully insert the optical fiber cable plugs all the way into the jacks.

Be careful not to fold or crimp the cable. When coiling an optical

fiber cable for storage, make sure the diameter of the coilis 15cm

{6 in) or larger.

Use an optical fiber cable with a length of 3 m (9 ft) or less.

Protect the optical fiber cable plugs from scratches and dust.

When the unitis not connected using an optical

fiber cable, be sure

to keep the protective dust cap plugged into the optical digital

output jack at ail times.

CD-Deck synchro function

If you have a Pioneer cassette deck provided with the CD-Deck

synchro function, connect the CDeDECK

SYNCHRO jacks of the

CD player and cassette deck. With this function, synchro recording

can be carried out between player and deck.

For details on connections and operation, refer to the Operating

Instructions supplied with the cassette deck.

e@ The CD-DECK SYNCHRO cord is not supplied with the CD player.

NOTE:

In order to enable the CD-DECK SYNCHRO recording function, the

normal output cable must be connected to the stereo amplifier.

System remote control with a Pioneer stereo

amplifier that has the i mark

{PD-S701: Australian model only, PD-S801: Multi-voltage model only)

When a Pioneer stereo amplifier bearing the fi] mark is used, connect

the CONTROL IN jack on the rear panel of the CD player to the

CONTROL OUT jack of the amplifier. This will enable the CD player

tobe controlled using the remote control unit supplied with the stereo

amplifier. If you do not plan to use this feature, it is not necessary to

connect CONTROL IN/OUT jacks.

The contro! cord is supplied with the CD player.

The remote control unit supplied with the amplifier can be used to

control Play, Stop, Pause and Track Search.

For instructions regarding connections and operation, refer to the

Operating Instructions provided with your stereo amplifier.

NOTES:

When a control cord is connected to the player's CONTROL IN

jack, direct control of the player with the remote control unit is

not possible.

Operate the player with the remote control unit

by aiming it at the amplifier.

Be sure to connect both of the control cord's plugs securely to

the CONTROL IN and CONTROL OUT terminals. Do not connect

only one end of the cable.

8e sure to turn off the power of the amplifier when connecting

the power cord and output cord.

When only the digital output is connected, the remote sensor of

the amplifier does not function. To operate it, connect the output

cable to the stereo amplifier as well as connecting the digital

output.

CONNECTING THE POWER CORD

Connect the power cord to a household AC wall outlet or an AC outlet

on your amplifier. (See the section "AC power cord connection and

functions" on page 4.)

Make sure plugs are inserted fully into the jacks and wall outlet.