Pioneer PDR-509 Manuel d'utilisation - Page 20
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer PDR-509. Pioneer PDR-509 40 pages. Compact disc recorder
Également pour Pioneer PDR-509 : Schémas de service (23 pages), Manuel d'entretien (48 pages), Manuel d'entretien (23 pages), Manuel d'entretien (14 pages)
Imprimer la page
Basic Playback and Recording
Recording One Track from a Digital Source
If you want to record just a single track, or a few selected tracks, from a
recorder starts and stops automatically, and there's no need to worry about recording levels— you'll get a perfect digital
copy of the original (if you want to change the digital recording level, see page 24). Before you start, make sure that your
digital source is properly connected to one of the recorder's digital inputs—see Connecting Up for Digital Playback &
Recording on page 10 for more on this.
If you're recording all the tracks on the source, see Recording All Tracks from a Digital Source on the next page. If you're
recording from some other digital source, turn to Manually Recording a Digital Source on page 23. If you're recording from
any source through the analog inputs, see Recording an Analog Source on page 25.
1
REPEAT
3
2
◊ÛB - .?/
INPUT
SELECTOR
3
Î
FADER
FINALIZE
DIGITAL
ERASE
SYNCHRO
7
8
6
1
¡
INPUT
SKIP
SELECTOR
PLAY
1
2
5
6
2
Press
DIGITAL SYNCHRO
change the recording mode:
1-track sync mode
All-track sync mode
All-track sync mode w/finalization
Record-pause mode (no sync)
20
1
DIGITAL
ANALOG
REC LEVEL
REC LEVEL
2
6
3
MONITOR
TIME
REC
AUTO/
TRACK NO.
4
MANUAL
WRITE
3
TIME
4
¢
SKIP ID
SET
CLEAR
5
3
4
7
8
repeatedly to
OPT
OPT
6
OPT
OPT
Note: If you find that synchro recording does not seem to work, see the trouble-
shooting section on page 37 for possible remedies.
,
,
CD
MD
Load a CD–R or CD–RW disc.
Check the display to make sure that there's enough space on the disc
for what you want to record.
Press INPUT SELECTOR to choose one of the
digital inputs.
Pressing
repeatedly switches the active input:
INPUT SELECTOR
ANA (Analog) - OPT (Optical) - COA (Coaxial)
The recorder's display indicates the current input.
Make sure that the source is not playing, then
press DIGITAL SYNCHRO.
Digital synchro recording will not work if the source is already playing!
The
indicator will start to blink when the recorder is ready.
SYNC
OPT
Play the source.
The recorder starts recording automatically.
The recorder enters record-pause mode after
recording one track.
If you're recording a
or
CD
the track changes or there is more than five seconds of silence on the
source.
If you're recording from
DCC
recorder encounters a new start
of silence on the source. (See also Notes on Digital recording from
DAT on page 19.)
If you're done, press 7 (stop).
To record further tracks, simply repeat steps 3 to 5.
After pressing 7 (stop), the display shows
the track information to the disc.
or
, this mode is ideal. The
DCC
DAT
The display shows the 1-track sync
mode, with the sync indicator blinking
to show that recording can start.
, recording stops automatically when
MD
or
tape, recording stops when the
DAT
or there is more than five seconds
ID
while it records
PMA REC