Pioneer PDR-509 Manuel d'utilisation - Page 21
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer PDR-509. Pioneer PDR-509 40 pages. Compact disc recorder
Également pour Pioneer PDR-509 : Schémas de service (23 pages), Manuel d'entretien (48 pages), Manuel d'entretien (23 pages), Manuel d'entretien (14 pages)
Imprimer la page
Recording All Tracks from a Digital Source
If you want to copy all the tracks from a
recorder starts and stops automatically. When recording from
or program play if you'd like the recorded tracks in a different order to the original. We do not recommend recording from a
in program play mode— use the 1-track synchro recording mode if you want to record the tracks in a different order.
DAT
If you are simply duplicating a source disc or tape, you'll probably want to finalize the
recording so that it's ready to be played on other
see Automatically Recording and Finalizing a Disc on the following page. If you're recording from a digital source other than
,
,
or
, see Manually Recording a Digital Source on page 23. If you're recording from any source through the
CD
MD
DCC
DAT
analog inputs, see Recording an Analog Source on page 25.
1
DIGITAL
ANALOG
REC LEVEL
REC LEVEL
REPEAT
6
3
2
◊ÛB - .?/
INPUT
MONITOR
TIME
SELECTOR
3
Î
FADER
FINALIZE
REC
DIGITAL
AUTO/
TRACK NO.
ERASE
SYNCHRO
MANUAL
WRITE
7
8
3
6
TIME
1
¡
4
¢
INPUT
SKIP
SKIP ID
SELECTOR
PLAY
SET
CLEAR
1
2
3
4
5
6
7
8
2
Press
repeatedly to
DIGITAL SYNCHRO
change the recording mode:
1-track sync mode
All-track sync mode
All-track sync mode w/finalization
Record-pause mode (no sync)
,
,
or
, use this mode. Like the 1-track synchro recording mode, the
CD
MD
DCC
DAT
or
MD
players. To finalize the disc automatically once recording has finished,
CD
1
Load a CD–R or CD–RW disc.
Check the display to make sure that there's enough space on the disc
for what you want to record.
2
Press INPUT SELECTOR to choose one of the
digital inputs.
Pressing
INPUT SELECTOR
ANA (Analog) - OPT (Optical) - COA (Coaxial)
The recorder's display indicates the current input.
3
Make sure that the source is not playing, then
press DIGITAL SYNCHRO twice.
Digital synchro recording won't work if the source is already playing!
The recorder goes into all-sync record pause mode and the
indicator starts to blink.
4
Play the source.
The recorder starts recording automatically.
5
After recording all tracks from the source, the
recorder goes into all-sync record-pause mode.
After the recorder encounters about five seconds of continuous silence,
it assumes the end of the source has been reached and goes into
record-pause mode and the display shows the
Be careful: if the recorder detects another signal (CDor MD) or start ID
OPT
(DAT or DCC) it will start recording again!
The recorder will enter record-pause mode if the digital signal is
interrupted for more than 5 seconds—see Digital signal interruptions
OPT
on page 19.
6
Press 7 (stop) to finish recording.
OPT
After pressing 7 (stop), the display shows
the track information to the disc.
OPT
Note: If you find that synchro recording does not seem to work, see the trouble-
shooting section on page 37 for possible remedies.
Basic Playback and Recording
, you can play the source in either normal play mode,
CD
–
(or
CD
R
CD
repeatedly switches the active input:
The display shows the all-track sync
mode, with the sync indicator blinking
OPT
to show that recording can start.
–
) after all-track sync
RW
SYNC
-
message again.
AL
SYNC
while it records
PMA REC
21