Pioneer XY-81 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Pioneer XY-81. Pioneer XY-81 12 pages. 8″ two way
Également pour Pioneer XY-81 : Manuel de l'utilisateur (12 pages)

Imprimer la page

Attachment of the CP-XY8HC1 Horizontal Flying Cradle

Attachment of wall mount brackets

! Four holes (M6) for wall mount brackets are provided on the rear of the XY-81.

! Hole layout (pitch): 108 mm × 50.8 mm (4.0" × 2.0")

! Be sure to use wall mount brackets that have enough strength to be able to withstand the weight of the XY-81.

To rotate the HF waveguide

Using a 3 mm Allen key, unscrew the four M4 screws in the top and bottom of the enclosure (2 at each end). Gently remove the grille from the front of the enclosure.

Using a 4 mm Allen key, remove the four socket-head bolts retaining the HF waveguide in place.

Lift the waveguide up and rotate to the desired position.

Reinstate the socket-head bolts and retighten. Avoid over-tightening as this may crack the waveguide.

Reinstate the grille by gently placing it in place over the front of the loudspeaker. Replace the four M4 machine screws to secure it in place.

Engb

Using the supplied M8 countersunk socket head bolts, align the mounting holes in

the end mounts of the yoke with the mounting points on the top and the bottom of

the enclosure. Tighten the bolts to ensure a solid fit. Once the desired angle of the

loudspeaker is set, tighten the knobs on the cradle to lock the position in place. The

points on the top of the flying cradle can be used for permanent installations or to

secure a hook clamp. Ensure that an M8 eyebolt is secured to the top point on the

XY-81 enclosure to use as a secondary safety feature.