Cruza XR500 Manuel du propriétaire - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Cruza XR500. Cruza XR500 15 pages. Electric power scooters
Également pour Cruza XR500 : Manuel de l'utilisateur (14 pages)

Imprimer la page

ADJUSTING THE CHAIN

The chain will come adjusted from the factory. However, it may be necessary

to adjust the chain from time to time. The chain must be well aligned onto the

sprockets in order to avoid uneven wear.

life.

How tight should the chain be?

If the chain is skipping or jumping on the sprockets, this is too

loose and may be harmful.

If the chain is making a humming sound when the wheel is

turning, this is too tight and may cause the chain to snap.

The correct tension is achieved by adjusting the chain from its

loose position to when it becomes lightly tense.

This will result in shortened chain

To tighten the chain:

Slightly loosen the two axle bolts on both

sides of the rear wheel. (Fig.14). Then slowly

adjust the two adjusting screws on each side

of the rear tire (Fig.15) until chain reaches the

proper tension.

Rotate the rear wheel to make sure

the chain is aligned.

Finally, lock and tighten the rear

axle bolts prior to riding.

Page