Cruza XR500 소유자 매뉴얼 - 페이지 13

{카테고리_이름} Cruza XR500에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cruza XR500 15 페이지. Electric power scooters
Cruza XR500에 대해서도 마찬가지입니다: 사용자 설명서 (14 페이지)

ADJUSTING THE CHAIN

The chain will come adjusted from the factory. However, it may be necessary

to adjust the chain from time to time. The chain must be well aligned onto the

sprockets in order to avoid uneven wear.

life.

How tight should the chain be?

If the chain is skipping or jumping on the sprockets, this is too

loose and may be harmful.

If the chain is making a humming sound when the wheel is

turning, this is too tight and may cause the chain to snap.

The correct tension is achieved by adjusting the chain from its

loose position to when it becomes lightly tense.

This will result in shortened chain

To tighten the chain:

Slightly loosen the two axle bolts on both

sides of the rear wheel. (Fig.14). Then slowly

adjust the two adjusting screws on each side

of the rear tire (Fig.15) until chain reaches the

proper tension.

Rotate the rear wheel to make sure

the chain is aligned.

Finally, lock and tighten the rear

axle bolts prior to riding.

Page