Ariston INTESA TP23 Manuel de l'utilisateur, instructions d'installation et d'entretien - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur, instructions d'installation et d'entretien pour {nom_de_la_catégorie} Ariston INTESA TP23. Ariston INTESA TP23 50 pages.

Imprimer la page

Installation

6.12 Fitting the Time Clock

To fit the mechanical time clock supplied with the boiler, it is nec-

essary to proceed as follows:

1) Remove the fastening screws 'A' from beneath the boiler;

2) Rotate the control panel forward, if necessary, it is possible to

lift the control panel up and rotate it to a fully horizontal posi-

tion;

3) Using a suitable knife, remove the knock out 'B' for the time

clock;

4) Insert the clock into the control panel;

5) Secure the clock in place using the four screw provided;

6) Remove the two screws 'C' and remove the cover to allow

access to the Printed Circuit Board;

7) Plug the clock cable into the connector on the Printed Circuit

Board and conect the cables to the clock as indicated in Fig.

6.21

Supplied By www.heating spares.co Tel. 0161 620 6677