Whirlpool AWM 6145/3 Manuel de démarrage rapide - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Whirlpool AWM 6145/3. Whirlpool AWM 6145/3 3 pages.

If you wish to connect

hot and cold water

supply (Fig.1):

1. Fix the red marked inlet hose at the hot

water tap and at the inlet valve with the red

filter on the rear side of machine.

2. Fix the other inlet hose at the cold water

tap and at the inlet valve with the blue

filter on the rear side of the machine.

Make sure:

a) The connections are tightly fixed

b) Do not invert their position

(for example: cold fill into hot inlet valve

and viceversa).

HOT / COLD FILL INSTRUCTION

Fig.1

Do not allow children to operate, crawl on, near or inside your

washer.

Note that during wash cycles, the surface temperature of the

porthole door may increase.

Close supervision of children is necessary when the appliance is

used near children.

If you wish to connect only the cold

fill follow the below

instruction (Fig.2):

1. You need a Y-piece connector. The

2. Fix the Y-piece connector to the cold fill

3. Connect the two inlet valves present on

Make sure:

All connections are tightly fixed.

Fig.2

Y-piece connector can be ordered via our

Service Organization or purchased in a

specialized hydraulic component store.

tap.

the rear part of the machine to the Y-

piece connector using the relative

provider hoses.

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 05442