Whirlpool 2188766 Manuel d'utilisation et d'entretien - Page 21

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Whirlpool 2188766. Whirlpool 2188766 24 pages. Side by side refrigerator

Imprimer la page

Is there a water filter installed on the refrigerator? The

water filtration system may have air in the lines, causing water

to drip. Additional flushing may help clear air from the lines.

Normal dispenser use should flush air from the lines within 24

to 72 hours.

Water flow from the dispenser decreases noticeably

Is there a water filter installed on the refrigerator?

The filter may be full or incorrectly installed. Remove the

water filter cartridge. See "Water Filtration System." Operate

the dispenser. If the water flow increases noticeably, replace

the filter.

The dispenser water is not cool enough

Has the refrigerator been newly installed? Allow 24 hours

for the refrigerator to cool completely.

Has a large amount of water been recently dispensed?

Allow 24 hours for the water to cool completely.

Has water not been recently dispensed? The first glass of

water may not be cool. Discard the first glass of water.

The divider between the two compartments is warm

The warmth is probably due to normal operation of the

automatic exterior moisture control. If still concerned, call for

service.

Temperature is too warm

Are the air vents blocked in either compartment? This

prevents the movement of cold air from the freezer to the

refrigerator. Remove any objects from in front of the air vents.

See "Ensuring Proper Air Circulation" for the location of air

vents.

Are the door(s) opened often? The refrigerator will warm

when this occurs. Keep the refrigerator cool by getting all

items out at one time, keeping food organized, and closing

the door as soon as possible.

Has a large amount of food just been added to the

refrigerator or freezer? Adding a large amount of food

warms the refrigerator. It can take several hours for the

refrigerator to return to the normal temperature.

Are the controls set correctly for the surrounding

conditions? See "Using the Controls."

Is the refrigerator not cooling? For models with digital

controls, turn the unit OFF then ON again to reset. See "Using

the Controls." If this does not correct the problem, call for

service.

There is interior moisture buildup

Are the air vents blocked in the refrigerator? Remove any

objects from in front of the air vents. See "Ensuring Proper Air

Circulation" for the location of air vents.

Are the doors opened often? Avoid humidity buildup by

getting all items out at one time, keeping food organized, and

closing the door as soon as possible.

Is the room humid? It is normal for moisture to build up

inside the refrigerator when the room air is humid.

Is the food packaged correctly? Check that all food is

securely wrapped. Wipe off damp food containers before

placing in the refrigerator.

Are the controls set correctly for the surrounding

conditions? See "Using the Controls."

Was a self-defrost cycle completed? It is normal for

droplets to form after the refrigerator self-defrosts.

The doors will not close completely

Are food packages blocking the door open? Rearrange

containers so that they fit more tightly and take up less

space.

Is the ice storage bin out of position? For models with an

interior ice storage bin, push the ice storage bin in all the way.

If the ice storage bin does not go in all the way, it may not be

put in straight. Pull it out and try again. For models with an ice

storage bin located on the freezer door, the bin should sit

level. To remove the bin, press the release button on the right

side of the bin and lift straight up. Replace the bin in the door

making sure it is properly aligned and snapped securely into

place. See "Ice Maker and Storage Bin."

Are the pans, shelves, bins, or baskets out of position?

Put the crisper cover and all pans, shelves, bins, and baskets

back into their correct positions. See the "Convertible

Vegetable/Meat Drawer, Crisper and Covers" section for

more information.

Are the gaskets sticking? Clean gaskets according to the

directions in the "Cleaning" section.

Does the refrigerator wobble or seem unstable? Level the

refrigerator. See "Door Closing."

Were the doors removed during product installation and

not properly replaced? Remove and replace the doors

according to the instructions in the "Door Removal" section,

or call a qualified service technician.

The doors are difficult to open

Are the gaskets dirty or sticky? Clean gaskets according to

the directions in the "Cleaning" section.

ASSISTANCE OR SERVICE

Before calling for assistance or service, please check

"Troubleshooting." It may save you the cost of a service call. If

you still need help, follow the instructions below.

When calling, please know the purchase date and the complete

model and serial number of your appliance. This information will

help us to better respond to your request.

If you need replacement parts

If you need to order replacement parts, we recommend that you

only use factory specified replacement parts. Factory specified

replacement parts will fit right and work right because they are

made with the same precision used to build every new

KIRKLAND SIGNATURE

appliance by Whirlpool Corporation.

To locate factory specified replacement parts in your area, call

the Costco Support Line for KIRKLAND SIGNATURE

by Whirlpool Corporation toll free: 1-866-403-5448.

Appliances