Whirlpool 240-VOLT ELECTRIC DRYER Manuel d'utilisation et d'entretien - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Whirlpool 240-VOLT ELECTRIC DRYER. Whirlpool 240-VOLT ELECTRIC DRYER 33 pages. 240-volt electric dryer
Également pour Whirlpool 240-VOLT ELECTRIC DRYER : Manuel d'utilisation et d'entretien (20 pages), Manuel d'utilisation et d'entretien (24 pages), Manuel d'utilisation et d'entretien (24 pages), Manuel d'utilisation et d'entretien (32 pages)

INSTALLATION INSTRUCTIONS

Electrical Requirements

A three-wire or four-wire, single phase

120/240-volt, 60-Hz., AC-only, electrical

supply is required on a separate 30-ampere

circuit, fused on both sides of the line. A

time-delay fuse or circuit breaker is

recommended.

This dryer is manufactured with the 3-wire,

frame-grounding conductor connected to the

NEUTRAL (center) of the wiring harness of

the terminal block. Do not have a fuse in the

neutral or grounding circuit. A fuse in the

neutral or grounding circuit could result in an

electrical shock.

Use a 4-conductor cord when the dryer is

installed in a mobile home or an area where

local codes do not permit grounding through

the neutral.

Electrical Connection Options

If Your Home Has:

3-wire electrical

receptacle

(NEMA Type 10-30R)

3-wire direct

4-wire electrical

receptacle

(NEMA Type 14-30R)

4-wire direct

*If local codes do not permit the connection of a frame-grounding conductor to the neutral wire, see the

instructions for "Alternate Connection".

And You Will Be

Connecting To:

A U.L.-listed, 120/240-volt

minimum, 30-amp., dryer

power supply cord.*

A fused disconnect or

circuit breaker box.*

A U.L.-listed, 120/240-volt

minimum, 30-amp., dryer

power supply cord.

A fused disconnect or

circuit breaker box.

Go To

Page: