Whirlpool 27' Manuel d'instructions d'installation - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Whirlpool 27'. Whirlpool 27' 27 pages. Microwave oven and thermal oven
Également pour Whirlpool 27' : Aide à l'emploi (36 pages), Manuel d'instructions d'installation (11 pages), Manuel d'instructions d'installation (11 pages), Manuel d'instructions d'installation (48 pages), Manuel d'instructions d'installation (22 pages), Manuel d'instructions d'installation (32 pages), Manuel d'instructions d'installation (12 pages), Instructions d'installation (5 pages)

LEVEL WASHER/DRYER

IMPORTANT: Level washer/dryer properly to reduce excess

noise and vibration.

Check levelness of washer/dryer

Place level here

With washer/dryer in its final location, place a level on top

edges of washer/dryer. Use side seam as a guide to check

levelness of sides. Check levelness of front using lid, as

shown. Rock washer/dryer back and forth to make sure all

four feet make solid contact with floor. If washer/dryer is level,

skip to step 2.

Not Level

Adjust leveling feet

Jam nut

If washer/dryer is not level, use a 9/16" or 14 mm open-end or

adjustable wrench to turn jam nuts clockwise on feet until they

are about 1/2" (13 mm) from the washer/dryer cabinet. Then

turn the leveling foot clockwise to lower the washer/dryer or

counterclockwise to raise the washer/dryer. Recheck levelness

of washer/dryer and repeat as needed.

HELPFUL TIP: You may want to prop up front of washer/dryer

about 4" (102 mm) with a wood block or similar object that

will support weight of washer/dryer.

Place level here

LEVEL

Not Level

Tighten leveling feet

Jam nut

When washer/dryer is level, use a 9/16" or 14 mm open-end

or adjustable wrench to turn jam nuts counterclockwise on

leveling feet tightly against washer/dryer cabinet.

HELPFUL TIP: You may want to prop washer/dryer with

a wooden block.

In U.S.A.

Plug into a grounded 3- or 4- prong

outlet