Whirlpool 27' Panduan Petunjuk Instalasi - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Pengering Whirlpool 27'. Whirlpool 27' 27 halaman. Microwave oven and thermal oven
Juga untuk Whirlpool 27': Bantuan Pekerjaan (36 halaman), Panduan Petunjuk Instalasi (11 halaman), Panduan Petunjuk Instalasi (11 halaman), Panduan Petunjuk Instalasi (48 halaman), Panduan Petunjuk Instalasi (22 halaman), Panduan Petunjuk Instalasi (32 halaman), Panduan Petunjuk Instalasi (12 halaman), Petunjuk Instalasi (5 halaman)

Halaman Cetak
Whirlpool 27' Panduan Petunjuk Instalasi

LEVEL WASHER/DRYER

IMPORTANT: Level washer/dryer properly to reduce excess
noise and vibration.
1.
Check levelness of washer/dryer
Place level here
With washer/dryer in its final location, place a level on top
edges of washer/dryer. Use side seam as a guide to check
levelness of sides. Check levelness of front using lid, as
shown. Rock washer/dryer back and forth to make sure all
four feet make solid contact with floor. If washer/dryer is level,
skip to step 2.
Not Level
2.
Adjust leveling feet
Jam nut
If washer/dryer is not level, use a 9/16" or 14 mm open-end or
adjustable wrench to turn jam nuts clockwise on feet until they
are about 1/2" (13 mm) from the washer/dryer cabinet. Then
turn the leveling foot clockwise to lower the washer/dryer or
counterclockwise to raise the washer/dryer. Recheck levelness
of washer/dryer and repeat as needed.
HELPFUL TIP: You may want to prop up front of washer/dryer
about 4" (102 mm) with a wood block or similar object that
will support weight of washer/dryer.
Place level here
LEVEL
Not Level
3.
Tighten leveling feet
Jam nut
When washer/dryer is level, use a 9/16" or 14 mm open-end
or adjustable wrench to turn jam nuts counterclockwise on
leveling feet tightly against washer/dryer cabinet.
HELPFUL TIP: You may want to prop washer/dryer with
a wooden block.
In U.S.A.
4.
Plug into a grounded 3- or 4- prong
outlet
23