AEQ AM-03 Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEQ AM-03. AEQ AM-03 13 pages. Self-powered stereo audio monitor
Également pour AEQ AM-03 : Manuel de l'utilisateur (13 pages)

4.2.2. L/R balance selection
The balance switcher (7) admits us to balance the signal between the left and right channels
or, if necessary, using only one of this, turning the switch anti-clockwise for the left channel or
clockwise for the right channel.
4.2.3. Audio Input selection
The switch (8) allows us to select one of the three stereo audio inputs that the unit is equipped
with.
Remember that the input selected with this switch will also be present at the parallel output (13-
14), as already mentioned in Section 3.1.1.
4.3. Audio phase metering
4.3.1. General
The phase meter permits us to monitor the audio signal in phase. This can be done in stereo
or only left or right channel respectively.
4.3.2. Left channel signal presence
In the case that the equipment only disposes of a signal proceding from left channel, the phase
meter will illuminate as shown in figure 5.
4.3.3. Right channel signal presence
In the case that the equipment only disposes of a signal proceding from right channel, the phase
meter will illuminate as shown in figure 6.
FIGURE 5
FIGURE 6