AEQ AM-03 사용자 설명서 - 페이지 9

{카테고리_이름} AEQ AM-03에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEQ AM-03 13 페이지. Self-powered stereo audio monitor
AEQ AM-03에 대해서도 마찬가지입니다: 사용자 설명서 (13 페이지)

페이지 인쇄

4.2.2. L/R balance selection

The balance switcher (7) admits us to balance the signal between the left and right channels

or, if necessary, using only one of this, turning the switch anti-clockwise for the left channel or

clockwise for the right channel.

4.2.3. Audio Input selection

The switch (8) allows us to select one of the three stereo audio inputs that the unit is equipped

with.

Remember that the input selected with this switch will also be present at the parallel output (13-

14), as already mentioned in Section 3.1.1.

4.3. Audio phase metering

4.3.1. General

The phase meter permits us to monitor the audio signal in phase. This can be done in stereo

or only left or right channel respectively.

4.3.2. Left channel signal presence

In the case that the equipment only disposes of a signal proceding from left channel, the phase

meter will illuminate as shown in figure 5.

4.3.3. Right channel signal presence

In the case that the equipment only disposes of a signal proceding from right channel, the phase

meter will illuminate as shown in figure 6.

FIGURE 5

FIGURE 6