Whirlpool AKR914CIXM Manuel d'instruction - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Whirlpool AKR914CIXM. Whirlpool AKR914CIXM 15 pages. Curved glass hood
Imprimer la page
A straight, short duct run will allow the hood to perform most
2.
efficiently.
Long duct runs, elbows, and transitions will reduce the
3.
performance of the hood. Use as few of them as possible.
Larger ducting may be required for best performance with
longer duct runs.
Attach an adequate length of φ160mm round duct to the air
4.
outlet adapter.
Straight line in between bends / elbows for better efficiency.
The air must not be discharge into a flue that is used for
5.
exhausting fumes from appliances burning gas or other fuels"
"Regulations concerning the discharge of air have to be
fulfilled.
Install a roof/wall cap. Connect round metal ductwork to cap
6.
and work back towards hood location. Use duct tape to seal the
joints between ductwork sections.
Electrical Connection
* Electrical wiring must be done by a qualified person(s) in
accordance with all applicable codes and standards. Turn off
electrical power at service entrance before wiring.
* If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
* Do not use the plug and an extension cord other than the ones
initially supplied with the hood.
* The earthing of this hood is compulsory. Do not remove ground
prong of the plug.
Let the exhaust run for a minimum of 1 meter in
9