Whirlpool AKR914CIXM 사용 설명서 - 페이지 10

{카테고리_이름} Whirlpool AKR914CIXM에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool AKR914CIXM 15 페이지. Curved glass hood

A straight, short duct run will allow the hood to perform most

efficiently.

Long duct runs, elbows, and transitions will reduce the

performance of the hood. Use as few of them as possible.

Larger ducting may be required for best performance with

longer duct runs.

Attach an adequate length of φ160mm round duct to the air

outlet adapter.

Straight line in between bends / elbows for better efficiency.

The air must not be discharge into a flue that is used for

exhausting fumes from appliances burning gas or other fuels"

"Regulations concerning the discharge of air have to be

fulfilled.

Install a roof/wall cap. Connect round metal ductwork to cap

and work back towards hood location. Use duct tape to seal the

joints between ductwork sections.

Electrical Connection

* Electrical wiring must be done by a qualified person(s) in

accordance with all applicable codes and standards. Turn off

electrical power at service entrance before wiring.

* If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons in

order to avoid a hazard.

* Do not use the plug and an extension cord other than the ones

initially supplied with the hood.

* The earthing of this hood is compulsory. Do not remove ground

prong of the plug.

Let the exhaust run for a minimum of 1 meter in