Whirlpool YUMV4084 Manuel d'utilisation et d'entretien - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Whirlpool YUMV4084. Whirlpool YUMV4084 15 pages. Microwave hood combination
Également pour Whirlpool YUMV4084 : Manuel d'instructions d'installation (24 pages), Manuel d'utilisation et d'entretien (28 pages)

Whirlpool YUMV4084 Manuel d'utilisation et d'entretien

Replacing Grease Filter

The grease filter should be removed and cleaned at least once a
month. Do not operate the microwave oven or vent fan without
the grease filter in place. See "Assistance or Service" for
information on reordering filters.
To Remove and Replace Grease Filter:
1. Remove the grease filter by pushing the filter to the left side
of the microwave oven until the right end of the filter drops
down, then pull out the filter.
2. Replace grease filter by inserting one end of the filter into the
left rim of the frame. Swing the right end of the filter up and
slide it into position.
Replacing Charcoal Filter
(for recirculation installation only)
The charcoal filter (not provided) should be used if venting is set
to recirculation. See "Accessories" in "Replacement Parts"
section for information on ordering.
A. Charcoal filter
B. Grease filter
C. Wire rods (2)
1. Remove grease filter. See Step 1 of "Replacing Grease Filter."
2. Remove wire rods holding charcoal filter in place, then
remove old charcoal filter.
3. Cover the inside of the grease filter with the new charcoal
filter.
4. Insert wire rods to hold the charcoal filter in place.
5. Reinstall grease filter. See Step 2 of "Replacing Grease Filter."
A
B
C

Replacing Cooktop Light

The cooktop light is a 25W halogen bulb. See "Assistance or
Service" section to reorder.
To Replace:
1. Unplug microwave oven or disconnect power.
2. Remove visor mounting screws.
A
A. Visor
B. Mounting screws (2)
3. Pull out visor.
4. Replace light.
5. Reinsert visor. Replace mounting screws.
6. Plug in microwave oven or reconnect power.
B
11