Whirlpool YUMV4084 Посібник з використання та догляду - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник з використання та догляду для Вентиляційна витяжка Whirlpool YUMV4084. Whirlpool YUMV4084 15 сторінок. Microwave hood combination
Також для Whirlpool YUMV4084: Інструкція з монтажу Посібник з монтажу (24 сторінок), Посібник з використання та догляду (28 сторінок)

Replacing Grease Filter

The grease filter should be removed and cleaned at least once a

month. Do not operate the microwave oven or vent fan without

the grease filter in place. See "Assistance or Service" for

information on reordering filters.

To Remove and Replace Grease Filter:

1. Remove the grease filter by pushing the filter to the left side

of the microwave oven until the right end of the filter drops

down, then pull out the filter.

2. Replace grease filter by inserting one end of the filter into the

left rim of the frame. Swing the right end of the filter up and

slide it into position.

Replacing Charcoal Filter

(for recirculation installation only)

The charcoal filter (not provided) should be used if venting is set

to recirculation. See "Accessories" in "Replacement Parts"

section for information on ordering.

A. Charcoal filter

B. Grease filter

C. Wire rods (2)

1. Remove grease filter. See Step 1 of "Replacing Grease Filter."

2. Remove wire rods holding charcoal filter in place, then

remove old charcoal filter.

3. Cover the inside of the grease filter with the new charcoal

filter.

4. Insert wire rods to hold the charcoal filter in place.

5. Reinstall grease filter. See Step 2 of "Replacing Grease Filter."

The cooktop light is a 25W halogen bulb. See "Assistance or

Service" section to reorder.

To Replace:

1. Unplug microwave oven or disconnect power.

2. Remove visor mounting screws.

A. Visor

B. Mounting screws (2)

3. Pull out visor.

4. Replace light.

5. Reinsert visor. Replace mounting screws.

6. Plug in microwave oven or reconnect power.