AeraMax AM IV Manuel d'installation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} AeraMax AM IV. AeraMax AM IV 6 pages. Pro air quality control system
MAIN ASSEMBLY INSTALLATION
WARNING:
To avoid the risk of electrocution confirm the electrical supply has been disconnected or switched off before continuing any installation work.
Fig 12
1
A
A
B
The power connector (B, in Fig
12) will carry power from the rear
housing to the main housing once
the assemblies are fully seated. The
main assembly will attach to the rear
housing assembly by the four screws
previously removed (Fig 5 & 6). Two
snap hooks (A, in Fig 12) will hold the
main and rear assemblies together
until the screws can be installed.
RE-INSTALLING FILTERS
IMPORTANT:
Make sure all plastic wrap is removed from filters.
Fig 16
Make sure filters are in correct order
- pre-filter / carbon filter / HEPA
filter - and inserted into filter frame
(Fig 16).
Fig 20
Once the unit is closed re-establish
power. Lights on the control panel will
be visible through the lens, indicating
the unit is operational (Fig 20). The
power light indicator will flash once
a second.
Fig 13
2
Carefully align the main assembly
with the rear housing assembly.
Slowly press into place until snap is
heard, and there is no gap between
the assemblies (Fig 13). The unit
should now support its own weight.
Fig 17
IMPORTANT: Make sure filter
detection area aligns with window
in filter frame (Fig 17).
Fig 14
3
1
Fig 15
4
Install six screws (previously removed) to secure main assembly to rear
housing assembly (Fig 14 & 15).
Fig 18
Open front panel by pressing
latches on both sides of unit. Allow
door to open fully. Insert filters
– IMPORTANT: make sure filter
detection window is aligned in
upper right corner (Fig 18).
LOCKING ACCESS PANEL
Fig 21
2
3
5
6
Fig 19
Close front panel by pressing
firmly until both sides latch closed
(Fig 19).
To restrict access to the control panel
and filters the unit can be locked. To
lock, insert the key provided and
rotate clockwise ¼ turn (Fig 21).
4
5