Xerox 220 Pour commencer - Page 10

Parcourez en ligne ou téléchargez le pdf Pour commencer pour {nom_de_la_catégorie} Xerox 220. Xerox 220 48 pages. Scanning services
Également pour Xerox 220 : Installation rapide (1 pages), Vue d'ensemble de la numérisation (2 pages), Manuel d'installation rapide (8 pages)

To perform network scanning, the DC220/230/332/340ST is

installed on a local area network. The protocol of the local area

network must be NetWare SPX/IPX or TCP/IP. For the user to

retrieve the scanned document file, it must be transferred to a file

server. The scanning and filing of the document are controlled by a

scanning component called a scan template.

Scan Templates

The scan template is essentially a job ticket for the scanned job. The

template is user-programmable, and contains parameters for the

scanned document. The user can program parameters such as one-

sided or two-sided scanning, scanned image size, and the location on

the file server where the file will be stored.

The Default Template

A default scan template (@default.xst) is created during the

installation of the scanning option and is stored on the DC220/230/

332/340ST. It is available for all scanning installations.

It is selected at the DC220/230/332/340ST Control Panel Touch

Screen to begin the scanning process.

NOTE

The Native scanning installations described in this guide provide

only the @default.xst template for all scanning users.

In this environment, additional scan templates can easily be created

using only Xerox's CentreWare Internet Services, or the

CentreWare Template Utility. You MUST refer to the Getting

Started with Internet Services guide to create templates with

Internet Services, or the Getting Started with Network Scanning

Services guide to use the CentreWare Template Utility.

Page 1 - 6

Companion to Getting Started with Scanning Services