Xerox 220 Getting Started - Page 10

Browse online or download pdf Getting Started for Printer Xerox 220. Xerox 220 48 pages. Scanning services
Also for Xerox 220: Quick Install (1 pages), Scanning Overview (2 pages), Quick Install Manual (8 pages)

Print Page
Xerox 220 Getting Started
To perform network scanning, the DC220/230/332/340ST is
installed on a local area network. The protocol of the local area
network must be NetWare SPX/IPX or TCP/IP. For the user to
retrieve the scanned document file, it must be transferred to a file
server. The scanning and filing of the document are controlled by a
scanning component called a scan template.

Scan Templates

The scan template is essentially a job ticket for the scanned job. The
template is user-programmable, and contains parameters for the
scanned document. The user can program parameters such as one-
sided or two-sided scanning, scanned image size, and the location on
the file server where the file will be stored.
The Default Template
A default scan template (@default.xst) is created during the
installation of the scanning option and is stored on the DC220/230/
332/340ST. It is available for all scanning installations.
It is selected at the DC220/230/332/340ST Control Panel Touch
Screen to begin the scanning process.
NOTE
The Native scanning installations described in this guide provide
only the @default.xst template for all scanning users.
In this environment, additional scan templates can easily be created
using only Xerox's CentreWare Internet Services, or the
CentreWare Template Utility. You MUST refer to the Getting
Started with Internet Services guide to create templates with
Internet Services, or the Getting Started with Network Scanning
Services guide to use the CentreWare Template Utility.
Page 1 - 6
Companion to Getting Started with Scanning Services