Xerox WorkCentre 7132 Manuel de configuration - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Xerox WorkCentre 7132. Xerox WorkCentre 7132 10 pages. Print copy scan fax email
Également pour Xerox WorkCentre 7132 : Manuel d'utilisation rapide (32 pages), Manuel complémentaire (3 pages), Manuel papier (2 pages), Manuel de l'évaluateur (24 pages), Manuel d'entretien (27 pages)

Select Apply.

Note

If prompted to enter a User Name and Password, the default settings are 11111

and x-admin respectively.

11.

Create a Template.

Select the Template button.

Select Create New.

Enter a name for the template.

Select Public for the Repository Type. The repository created above should

appear in the window.

Note

A private template does not require separate repository settings, since the routing

information is entered directly into the template itself.

Select Next.

Make selections as needed to define the properties of the scanned files created by

this template.

Select OK.

Procedure for Network Scanning

At the device select

Select a template from the list. You can also change any other value from the control

panel without impacting the template configuration; only the current job will be

affected.

Load a sample document into the document feeder.

Press the green

as defined within the template.

From a workstation, log on to the FTP or SMB Server. Navigate to the repository

(destination) that was specified earlier. Your scanned document is located in that folder.

Note

If remote authentication has been enabled, a separate login screen appears when

the Network Scanning feature is selected. Documents are not scanned unless the

remote authentication server authenticates user access.

All Services

and Network Scanning.

Start

button. The job is sent to the server using FTP or SMB protocol

Network Scanning Setup (Optional)