Xerox WorkCentre 7132 Руководство по настройке - Страница 8

Просмотреть онлайн или скачать pdf Руководство по настройке для Принтер Xerox WorkCentre 7132. Xerox WorkCentre 7132 10 страниц. Print copy scan fax email
Также для Xerox WorkCentre 7132: Руководство по быстрому использованию (32 страниц), Дополнительное руководство (3 страниц), Бумажное руководство (2 страниц), Руководство для оценщиков (24 страниц), Руководство по эксплуатации (27 страниц)

Xerox WorkCentre 7132 Руководство по настройке
f.
Select Apply.
Note
If prompted to enter a User Name and Password, the default settings are 11111
and x-admin respectively.
11.
Create a Template.
a.
Select the Template button.
b.
Select Create New.
c.
Enter a name for the template.
d.
Select Public for the Repository Type. The repository created above should
appear in the window.
Note
A private template does not require separate repository settings, since the routing
information is entered directly into the template itself.
e.
Select Next.
f.
Make selections as needed to define the properties of the scanned files created by
this template.
g.
Select OK.
Procedure for Network Scanning
1.
At the device select
2.
Select a template from the list. You can also change any other value from the control
panel without impacting the template configuration; only the current job will be
affected.
3.
Load a sample document into the document feeder.
4.
Press the green
as defined within the template.
5.
From a workstation, log on to the FTP or SMB Server. Navigate to the repository
(destination) that was specified earlier. Your scanned document is located in that folder.
Note
If remote authentication has been enabled, a separate login screen appears when
the Network Scanning feature is selected. Documents are not scanned unless the
remote authentication server authenticates user access.
Copyright © 2006, Xerox Corporation. All rights reserved.
All Services
and Network Scanning.
Start
button. The job is sent to the server using FTP or SMB protocol
Network Scanning Setup (Optional)
8