Xerox DocuPrint C3055 DX Manuel de paramétrage - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel de paramétrage pour {nom_de_la_catégorie} Xerox DocuPrint C3055 DX. Xerox DocuPrint C3055 DX 33 pages. Internal hard disk
Également pour Xerox DocuPrint C3055 DX : Manuel d'installation (8 pages), Manuel d'installation (16 pages), Manuel de paramétrage (20 pages), Manuel d'installation (16 pages)
Imprimer la page
Whole Output Size
Automatically calculates the zoom ratio based on [Document Size] and [Output Size] and
prints the document so that the physical size of [Document Size] fits into the printable area
of [Output Size].
Note
• When continuous-form paper is selected for [Document Size], [Fixed %] and [Whole Output Size] derive
the same print result.
• Use the <
Holding down the <
pressing the <
2 Sided Print
Sets whether or not to print 2 sided.
The following options are available:
[1 Sided] (default)
Does not print 2-sided.
[Head to Head]
Prints the reverse side of a page so that the finished document opens like a book.
[Head to Toe]
Prints the reverse side of a page so that the finished document opens like a calendar.
Note
• On DocuPrint C3055, this item is displayed only if the duplex unit is installed (optional).
2 Pages Up
This feature prints two pages of data onto one page. Two pages can be printed side by side
or one on top of the other.
The following options are available:
[1 Page Up] (default)
Does not perform 2 Pages Up.
[Left -> Right]
Performs 2 Pages Up. This prints the first page of the document on the left or top half of a
page.
[Right -> Left]
Performs 2 Pages Up. This prints the first page of the document on the right or bottom half
of a page.
Important
• When the orientation of [Document Size] is set to landscape, [Left -> Right] and [Right -> Left] derive the
same print result.
Bypass-Wait User
This feature allows you to request bypass printing and manually start printing by pressing
the <Eject/Set> button on the control panel. Set whether or not to enable this feature by
selecting [On] or [Off] (default).
Font
Kanji Font
Sets the font for double-byte characters (kanji) when the Chinese font kit is installed.
The following options are available:
[Shu Song]
[Hei Ti]
[Fang Song]
[Kai Ti]
16
2 Setting the ESC/P Mode
> or <
> button when entering the values for [Variable %].
> or <
> button scrolls through the options in a circular fashion. Simultaneously
> and <
> buttons displays the default value.