Xerox DocuPrint C3055 DX Manuel de paramétrage - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel de paramétrage pour {nom_de_la_catégorie} Xerox DocuPrint C3055 DX. Xerox DocuPrint C3055 DX 33 pages. Internal hard disk
Également pour Xerox DocuPrint C3055 DX : Manuel d'installation (8 pages), Manuel d'installation (16 pages), Manuel de paramétrage (20 pages), Manuel d'installation (16 pages)
Imprimer la page
2.2
Setting the ESC/P Mode Menu
This section explains the items in the ESC/P mode menu and how to configure them.
ESC/P Mode Menu Items
The items that can be set in the ESC/P mode menu are as follows:
Features Menu
Paper Tray
Sets the paper tray to be used when printing.
The following options are available:
[Tray 1] (default)
[Tray 2]
[Tray 3]
[Tray 4]
[Bypass Tray]
[Auto]
When [Auto] is selected, the printer searches for the paper tray that contains the paper that
matches the [Output Size] setting and automatically feeds paper from that paper tray.
Note
• [Tray 1] - [Tray 4] display the size of the paper loaded in each tray next to the tray names.
• When [Auto] is selected, and if the paper of the same size is loaded in more than one paper tray, the
printer selects a paper tray based on the tray priority setting of a common menu.
• [Tray 2] - [Tray 4] are displayed only if the 500 sheet feeders (optional) are installed.
Output Size
Sets the size of the paper to be used when printing. This can be set only when [Paper Tray]
is set to [Auto] or [Bypass Tray]. Only the sizes for cut sheets can be selected.
The following options are available:
[A4] (default)
[A3]
[A5]
[B4]
[B5]
[11 x 17]
[8.5 x 13] (Available only when [Paper Tray] is set to [Bypass Tray])
[8.5 x 14]
[8.5 x 11]
[100 x 148mm] (Available only when [Paper Tray] is set to [Bypass Tray])
Note
• When [Zoom Mode] is set to [Fixed %] or [Whole Output Size], the printer automatically determines the
zoom ratio based on the [Document Size] and [Output Size] settings.
When [2 Pages Up] is enabled, the zoom ratio will be 1/2 of the zoom ratio determined from [Document
Size] and [Output Size].
• [Output Size] cannot be set when [Paper Tray] is set to [Tray 1], [Tray 2], [Tray 3], or [Tray 4]. The size of
the paper loaded in the paper tray will be displayed.
14
2 Setting the ESC/P Mode