Xerox D35 Manuel de l'utilisateur - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Xerox D35. Xerox D35 50 pages.

Installation

Connect the USB Cable and Turn on the Power

If you did not connect the scanner earlier, proceed with the instructions below.

Remove any tape from the USB cable.

Plug the USB cable into the USB port on the scanner then into a USB port on the computer.

Check your computer's manual for USB port locations.

If the plug does not attach easily, make sure that you are plugging it in correctly. Do not force

the plug into either connection.

Turn on the scanner power.

The status light comes on and flashes indicating that the scanner is receiving power.

Your computer recognizes that a scanner has been plugged into the USB port and

automatically loads the appropriate software to run the scanner.

The Visioneer Scan Utility software installation will start automatically after you click Close on

the driver Installation Complete window. Follow the instructions on the screen to install the

application.

Software

About the Software

Visioneer Scan

This utility uses the scanner's TWAIN interface for scanning. You can select a

Utility

destination folder on your computer and save the image as any one of several

popular image file formats (BMP, JPG, GIF, TIF, Multi-Page TIF, PDF, Multi-Page PDF).

Return to the Main menu and click Install software.

If a version of the software is already installed on the system, the option will be greyed out.

However, if there is a newer version available online, it will be possible to upgrade by selecting

the appropriate button option.

User Guide

Xerox

D35 Scanner

4-5