Xerox WorkCentre 6400 Manuel de configuration - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Xerox WorkCentre 6400. Xerox WorkCentre 6400 12 pages. Color multifunction printer
Également pour Xerox WorkCentre 6400 : Caractéristiques (1 pages), Spécifications (1 pages), Manuel d'utilisation rapide (17 pages), Manuel de l'évaluateur (25 pages), Manuel d'installation (2 pages), Manuel d'information (44 pages), Manuel de l'évaluateur (24 pages), Manuel d'utilisation rapide (17 pages), Manuel d'utilisation rapide (16 pages), Manuel d'utilisation rapide (16 pages), Manuel (32 pages)

Imprimer la page
Xerox WorkCentre 6400 Manuel de configuration

Prerequisites

•
The Multi-function Printer software must meet a minimum software level. The supported devices and
the minimum software levels are:
WC51xx software - Version 21.120.65.170
WC56xx software - SBC Version 25.54.65.170
WC56xx software
- MBC Version 21.120.65.170
WC57xx software - Version 061.132.222.28900
WC6400 software - Version 061.070.102.23501
WC75xx software - Version 061.121.222.21500
WC77xx software – Version 061.090.223.10600
CQ87xx / 89xx software - Version 071.160.222.28900
CQ93xx software - Version 61.180.222.08700
•
Must be using supported cards and card readers. See Appendix A.
•
The Secure Socket Layer (SSL) must be enabled
Note
•
Extensible service setup has to be enabled if the Xerox Extensible Interface Platform® (EIP)
application is used.
•
The open USB card reader standard cannot be used with Xerox Secure Access branded card
readers.

Installation

Connecting the USB card reader

Connect the card reader to one of the available USB ports on the MFP. The reader can be mounted in a
number of locations on the MFP. For example, it can be placed on the top panel next to the UI, on the left
hand shelf or on the top of the finisher.
Most of the tested readers will indicate that they have power and are operational by illuminating an LED
and possibly emitting a sound once the card reader has booted up.
Please insure the card reader software is at the latest level by checking with the particular manufacture
web site as outlined in Appendix A. Some readers require a particular configuration to be compatible with
the MFP. This is defined in Appendix B. Please be sure the software and configuration are correct
before the reader is installed on the MFP.
4 USB Card Reader Configuration Guide