Xerox WorkCentre 6400 구성 매뉴얼 - 페이지 6

{카테고리_이름} Xerox WorkCentre 6400에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox WorkCentre 6400 12 페이지. Color multifunction printer
Xerox WorkCentre 6400에 대해서도 마찬가지입니다: 특징 (1 페이지), 사양 (1 페이지), 빠른 사용 설명서 (17 페이지), 평가자 매뉴얼 (25 페이지), 설치 매뉴얼 (2 페이지), 정보 매뉴얼 (44 페이지), 평가자 매뉴얼 (24 페이지), 빠른 사용 설명서 (17 페이지), 빠른 사용 설명서 (16 페이지), 빠른 사용 설명서 (16 페이지), 매뉴얼 (32 페이지)

Prerequisites

•

The Multi-function Printer software must meet a minimum software level. The supported devices and

the minimum software levels are:

WC51xx software - Version 21.120.65.170

WC56xx software - SBC Version 25.54.65.170

WC56xx software

- MBC Version 21.120.65.170

WC57xx software - Version 061.132.222.28900

WC6400 software - Version 061.070.102.23501

WC75xx software - Version 061.121.222.21500

WC77xx software – Version 061.090.223.10600

CQ87xx / 89xx software - Version 071.160.222.28900

CQ93xx software - Version 61.180.222.08700

•

Must be using supported cards and card readers. See Appendix A.

•

The Secure Socket Layer (SSL) must be enabled

Note

•

Extensible service setup has to be enabled if the Xerox Extensible Interface Platform® (EIP)

application is used.

•

The open USB card reader standard cannot be used with Xerox Secure Access branded card

readers.

Connect the card reader to one of the available USB ports on the MFP. The reader can be mounted in a

number of locations on the MFP. For example, it can be placed on the top panel next to the UI, on the left

hand shelf or on the top of the finisher.

Most of the tested readers will indicate that they have power and are operational by illuminating an LED

and possibly emitting a sound once the card reader has booted up.

Please insure the card reader software is at the latest level by checking with the particular manufacture

web site as outlined in Appendix A. Some readers require a particular configuration to be compatible with

the MFP. This is defined in Appendix B. Please be sure the software and configuration are correct

before the reader is installed on the MFP.

4 USB Card Reader Configuration Guide