Xerox DocuPrint 180 Manuel de planification - Page 27

Parcourez en ligne ou téléchargez le pdf Manuel de planification pour {nom_de_la_catégorie} Xerox DocuPrint 180. Xerox DocuPrint 180 38 pages. User job submission quick reference card
Également pour Xerox DocuPrint 180 : Manuel d'utilisation (38 pages), Spécifications (2 pages), Code List (16 pages), Carte de référence rapide (2 pages), Carte de référence rapide (2 pages), Manuel de référence (42 pages), Référence rapide (2 pages), Manuel complémentaire (48 pages), Carte de référence rapide (2 pages), Manuel de référence (2 pages)

Imprimer la page
Xerox DocuPrint 180 Manuel de planification
C.P. Bourg Document Finisher (BDFx)

System Dependencies and Prerequisites

Configuration Guide

Printer Configurations
IOT
STACKER
Listed below are the dependencies and prerequisites for
installing the BDFx, BCFx and SQEDG module.
•
The printer must be equipped with a Bypass Transport to
enable In-line Finishing.
•
It is highly recommended that the printer is equipped with a
Bourg Sheet Rotator (BSR) to maximize output.
•
Due to the height of the bypass transport on DocuPrint it is
not possible to attach the BCFx without the BSR.
•
Requires a minimum of 2 skipped pitches (3 skipped pitches
with BCF), which results in low productivity with small
booklets. (A3/ 11 x 17 requires only one skipped pitch with or
without the BCF.)
The Configuration Guide contains diagrams over the various
Finishing Solutions that are currently supported.
BYPASS
STACKER
TRANSPORT
4-3
Finisher Configurations
BDFx
BCFx
BDFx
BCFx
BDFx
SQEDG
BSR
BSR
BDFx
BSR
BDFx
SQEDG
BSR
BCFx
BDFx
SQEDG
BDFx
SQEDG
BCFx
BDFx