Xerox DocuPrint 180 Manual Perencanaan - Halaman 27

Jelajahi secara online atau unduh pdf Manual Perencanaan untuk Perangkat lunak Xerox DocuPrint 180. Xerox DocuPrint 180 38 halaman. User job submission quick reference card
Juga untuk Xerox DocuPrint 180: Panduan Pengoperasian (38 halaman), Spesifikasi (2 halaman), Daftar Kode (16 halaman), Kartu Referensi Cepat (2 halaman), Kartu Referensi Cepat (2 halaman), Panduan Referensi (42 halaman), Referensi Cepat (2 halaman), Panduan Tambahan (48 halaman), Kartu Referensi Cepat (2 halaman), Panduan Referensi (2 halaman)

Halaman Cetak
Xerox DocuPrint 180 Manual Perencanaan
C.P. Bourg Document Finisher (BDFx)

System Dependencies and Prerequisites

Configuration Guide

Printer Configurations
IOT
STACKER
Listed below are the dependencies and prerequisites for
installing the BDFx, BCFx and SQEDG module.
•
The printer must be equipped with a Bypass Transport to
enable In-line Finishing.
•
It is highly recommended that the printer is equipped with a
Bourg Sheet Rotator (BSR) to maximize output.
•
Due to the height of the bypass transport on DocuPrint it is
not possible to attach the BCFx without the BSR.
•
Requires a minimum of 2 skipped pitches (3 skipped pitches
with BCF), which results in low productivity with small
booklets. (A3/ 11 x 17 requires only one skipped pitch with or
without the BCF.)
The Configuration Guide contains diagrams over the various
Finishing Solutions that are currently supported.
BYPASS
STACKER
TRANSPORT
4-3
Finisher Configurations
BDFx
BCFx
BDFx
BCFx
BDFx
SQEDG
BSR
BSR
BDFx
BSR
BDFx
SQEDG
BSR
BCFx
BDFx
SQEDG
BDFx
SQEDG
BCFx
BDFx