Xerox Phaser 6100DN Manuel de sécurité - Page 29

Parcourez en ligne ou téléchargez le pdf Manuel de sécurité pour {nom_de_la_catégorie} Xerox Phaser 6100DN. Xerox Phaser 6100DN 38 pages. Disk overwrite installation and usage
Également pour Xerox Phaser 6100DN : Manuel d'installation (34 pages), Spécifications (2 pages), Manuel de l'utilisateur (32 pages), Brochure & Specs (4 pages), Manuel de l'utilisateur (28 pages), Manuel d'installation (2 pages), Manuel d'installation (2 pages), Note de mise à jour (2 pages), Manuel de démarrage (37 pages), Manuel (34 pages), Manuel (34 pages), Manuel de démarrage (34 pages), Manuel de l'utilisateur (32 pages), Manuel d'installation et d'utilisation (8 pages)

Imprimer la page
Xerox Phaser 6100DN Manuel de sécurité

Creating and Using a Self-Signed Certificate

Security Guide
2. Use an existing certificate obtained from a certificate authority
(i.e. VeriSign, Thawte, etc.)
When SSL is disabled
When SSL is disabled (off), other web-based logins provided by
the Xerox FreeFlow Print Server may not be secure (encrypted).
To guarantee a secure connection with Xerox FreeFlow Print
Server, do one of the following:
•
Enable SSL optionally via the GUI and connect to the Xerox
FreeFlow Print Server via https://
•
Require SSL as mandatory via the GUI and connect to the
ISGW
–
Logon to the Xerox FreeFlow Print Server as System
Administrator or as a user who belongs to the System
Administrator group.
–
Go to Setup -> SSL/TLS
–
If not already enabled, click the 'OK' button in the "Information"
pop-up box
–
Click on the 'Add Certificate Button'. This will launch the "Add
Certificate Wizard".
Step 1 - Select "Self-Signed Certificate"
Step 2 - Select and enter either the server
•
Domain Name
•
IP Address
•
Other
Step 3 - Enter the requested information:
•
Organization (required)
•
Organizational Unit (optional)
•
E-mail (optional)
•
Locality (optional)
•
State/Province (optional)
•
Country (required)
Step 4 - Enter the length of time that the certificate will be valid
for.
Step 5 - Verify information entered in previous steps.
Step 6 - A message will appear indicating that the self-signed
certificate has been installed.
25