Xerox Phaser 6100DN 보안 매뉴얼 - 페이지 29

{카테고리_이름} Xerox Phaser 6100DN에 대한 보안 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Phaser 6100DN 38 페이지. Disk overwrite installation and usage
Xerox Phaser 6100DN에 대해서도 마찬가지입니다: 설치 매뉴얼 (34 페이지), 사양 (2 페이지), 사용자 설명서 (32 페이지), 브로셔 및 사양 (4 페이지), 사용자 설명서 (28 페이지), 설치 매뉴얼 (2 페이지), 설치 매뉴얼 (2 페이지), 릴리스 노트 (2 페이지), 시작하기 매뉴얼 (37 페이지), 매뉴얼 (34 페이지), 매뉴얼 (34 페이지), 시작하기 매뉴얼 (34 페이지), 사용자 설명서 (32 페이지), 설치 및 운영 매뉴얼 (8 페이지)

Xerox Phaser 6100DN 보안 매뉴얼

Creating and Using a Self-Signed Certificate

Security Guide
2. Use an existing certificate obtained from a certificate authority
(i.e. VeriSign, Thawte, etc.)
When SSL is disabled
When SSL is disabled (off), other web-based logins provided by
the Xerox FreeFlow Print Server may not be secure (encrypted).
To guarantee a secure connection with Xerox FreeFlow Print
Server, do one of the following:
Enable SSL optionally via the GUI and connect to the Xerox
FreeFlow Print Server via https://
Require SSL as mandatory via the GUI and connect to the
ISGW
Logon to the Xerox FreeFlow Print Server as System
Administrator or as a user who belongs to the System
Administrator group.
Go to Setup -> SSL/TLS
If not already enabled, click the 'OK' button in the "Information"
pop-up box
Click on the 'Add Certificate Button'. This will launch the "Add
Certificate Wizard".
Step 1 - Select "Self-Signed Certificate"
Step 2 - Select and enter either the server
Domain Name
IP Address
Other
Step 3 - Enter the requested information:
Organization (required)
Organizational Unit (optional)
E-mail (optional)
Locality (optional)
State/Province (optional)
Country (required)
Step 4 - Enter the length of time that the certificate will be valid
for.
Step 5 - Verify information entered in previous steps.
Step 6 - A message will appear indicating that the self-signed
certificate has been installed.
25