Yamaha DM 2000 Version 2 Manuel d'orientation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'orientation pour {nom_de_la_catégorie} Yamaha DM 2000 Version 2. Yamaha DM 2000 Version 2 8 pages. Version 2
Également pour Yamaha DM 2000 Version 2 : Manuel du propriétaire (44 pages), Manuel d'installation (28 pages), Manuel d'installation (14 pages), Manuel d'installation (22 pages), Manuel d'installation du logiciel (13 pages), Manuel du propriétaire (1 pages), Manuel complémentaire (4 pages), Manuel du propriétaire (37 pages), Manuel de configuration (35 pages), Manuel de redondance (8 pages), Manuel du propriétaire (3 pages), (French) Guide d'installation du système d'exploitation (13 pages)

Subgroups

≠

Assign Subgroups (Bus) to Matrix

1. Press LAYER / [MASTER].

2. Press FADER MODE [AUX/MTRX].

3. Press MATRIX SELECT key to select Matrix.

4. Adjust faders 1-20 as needed.

Assign Subgroups (Bus) to Stereo

1. Select any channel.

2. On SELECTED CHANNEL / ROUTING, press [DISPLAY].

3. Keep pressing this button to locate "Bus to Stereo" page.

4. Use cursor and data wheel as needed.

Storing & Recalling Scenes

≠

Storing

1. Press SCENE MEMORY [

2. Press SCENE MEMORY [STORE].

3. Name the scene in the title edit window.

4. Press "OK" in the title edit window.

Recalling

1. Press SCENE MEMORY [

2. Press SCENE MEMORY [RECALL].

Important Comment on Digital Mixer System Operation:

If your DM2000 is in a configuration with more than 24 microphone inputs, the

remote microphone inputs are probably connected to the DM2000 with a digital

signal connection; other components may also have digital signal connection

with DM2000. This type of connection usually requires a separate word clock

synchronizing signal. Systems with word clock connections should not be

operated either partially disconnected or with individual units powered off. This

can interrupt the word clock. You may then experience either spurious noises or

distortion at random intervals or the DM2000 may display a word clock error

message.

Yamaha recommends the mixer and all other digitally connected components be

powered on and off together and that you do not make system changes without

qualified assistance. If one of these components must be disconnected for any

reason, the word clock signal integrity must be maintained for continued proper

system operation.

] or [

] to locate a vacant scene.

] or [

] to locate a stored scene.