Yamaha DM 2000 Version 2 Manuel d'orientation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'orientation pour {nom_de_la_catégorie} Yamaha DM 2000 Version 2. Yamaha DM 2000 Version 2 8 pages. Version 2
Également pour Yamaha DM 2000 Version 2 : Manuel du propriétaire (44 pages), Manuel d'installation (28 pages), Manuel d'installation (14 pages), Manuel d'installation (22 pages), Manuel d'installation du logiciel (13 pages), Manuel du propriétaire (1 pages), Manuel complémentaire (4 pages), Manuel du propriétaire (37 pages), Manuel de configuration (35 pages), Manuel de redondance (8 pages), Manuel du propriétaire (3 pages), (French) Guide d'installation du système d'exploitation (13 pages)

Set Input Compressor

1. Select the channel

2. On SELECTED CHANNEL / DYNAMICS, press [COMP ON] button

if unlit.

3. On SELECTED CHANNEL / DYNAMICS, press [DISPLAY].

4. Keep pressing this button to locate "Compressor Library" page.

5. Recall program desired and edit if needed...

OR...

1. Select the channel.

2. On SELECTED CHANNEL / DYNAMICS, press [COMP ON] button

if unlit.

3. Press [GATE/COMP] to light [COMP] indicator.

4. Adjust [THRESHOLD] [RATIO] [ATTACK] [RELEASE] [GAIN] as

needed.

Set Input Equalization

1. Select the channel.

2. On SELECTED CHANNEL / EQUALIZER, press [EQ ON] button

if unlit.

3. On SELECTED CHANNEL / EQUALIZER, press [DISPLAY].

4. Keep pressing this button to locate "Equalizer Library" page.

5. Recall program desired and edit if needed...

OR...

1. Select the channel.

2. On SELECTED CHANNEL / EQUALIZER, press [EQ ON] button

if unlit.

3. Adjust [FREQUENCY] [Q] [GAIN] for each band as needed.

NOTE: [FREQUENCY] & [Q] toggle on same control by pushing the knob.

Output Channel Setup

≠

NOTE: Assume the output patch is completed.

Select the Output Channel

1. Press LAYER / [MASTER].

2. Select the output channel (bus master) by touching the fader.

3. If fader touch sensitivity is turned off, press [SEL].