Yamaha DM 2000 Version 2 Oriëntatiehandboek - Pagina 6

Blader online of download pdf Oriëntatiehandboek voor {categorie_naam} Yamaha DM 2000 Version 2. Yamaha DM 2000 Version 2 8 pagina's. Version 2
Ook voor Yamaha DM 2000 Version 2: Gebruikershandleiding (44 pagina's), Installatiehandleiding (28 pagina's), Installatiehandleiding (14 pagina's), Installatiehandleiding (22 pagina's), Software-installatiehandleiding (13 pagina's), Gebruikershandleiding (1 pagina's), Aanvullende handleiding (4 pagina's), Gebruikershandleiding (37 pagina's), Installatiehandleiding (35 pagina's), Handleiding redundantie (8 pagina's), Gebruikershandleiding (3 pagina's), (Duits) Installatiehandleiding van het besturingssysteem (13 pagina's)

Set Input Compressor

1. Select the channel

2. On SELECTED CHANNEL / DYNAMICS, press [COMP ON] button

if unlit.

3. On SELECTED CHANNEL / DYNAMICS, press [DISPLAY].

4. Keep pressing this button to locate "Compressor Library" page.

5. Recall program desired and edit if needed...

OR...

1. Select the channel.

2. On SELECTED CHANNEL / DYNAMICS, press [COMP ON] button

if unlit.

3. Press [GATE/COMP] to light [COMP] indicator.

4. Adjust [THRESHOLD] [RATIO] [ATTACK] [RELEASE] [GAIN] as

needed.

Set Input Equalization

1. Select the channel.

2. On SELECTED CHANNEL / EQUALIZER, press [EQ ON] button

if unlit.

3. On SELECTED CHANNEL / EQUALIZER, press [DISPLAY].

4. Keep pressing this button to locate "Equalizer Library" page.

5. Recall program desired and edit if needed...

OR...

1. Select the channel.

2. On SELECTED CHANNEL / EQUALIZER, press [EQ ON] button

if unlit.

3. Adjust [FREQUENCY] [Q] [GAIN] for each band as needed.

NOTE: [FREQUENCY] & [Q] toggle on same control by pushing the knob.

Output Channel Setup

≠

NOTE: Assume the output patch is completed.

Select the Output Channel

1. Press LAYER / [MASTER].

2. Select the output channel (bus master) by touching the fader.

3. If fader touch sensitivity is turned off, press [SEL].