Yamaha TG77 Manuel d'installation - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Yamaha TG77. Yamaha TG77 20 pages. Replacement display
Également pour Yamaha TG77 : Format des données Midi (19 pages), Manuel d'instruction (46 pages)

Imprimer la page

Yamaha TG77 LCD Replacement Guide

Fig. 19 - Screw Locations on LCD Front Panel shown in Red

Step 7:

Remove the LCD front panel.

There are 4 screws that hold the LCD front panel in place as shown in the

photo above Fig. 19. In addition, you need to unplug the ribbon cable,

shown in Fig. 20 on page 18. When you remove the LCD, be sure to take

note of how both the ribbon cable and LCD power cable are threaded

through the case openings so you can later properly thread the wiring of the

new replacement LCD.

Once the LCD front panel is removed from the case, you will find the LCD is

attached to it with 4 screws as shown in Fig. 21 on page 18. Remove the

original LCD from the front panel; make note of the orientation of the LCD.

Install the replacement LCD in its place, be sure it is oriented correctly and

properly aligned. Correctly thread the LCD power wire and ribbon cable

through the case openings and plug them in. The power wire will plug into

CN605 the 2-pin white connector you installed earlier and shown in Fig. 13

on page 13.

produced by: glitchscience.com