Yamaha TG77 설치 매뉴얼 - 페이지 17

{카테고리_이름} Yamaha TG77에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha TG77 20 페이지. Replacement display
Yamaha TG77에 대해서도 마찬가지입니다: 미디 데이터 포맷 (19 페이지), 사용 설명서 (46 페이지)

페이지 인쇄

Yamaha TG77 LCD Replacement Guide

Fig. 19 - Screw Locations on LCD Front Panel shown in Red

Step 7:

Remove the LCD front panel.

There are 4 screws that hold the LCD front panel in place as shown in the

photo above Fig. 19. In addition, you need to unplug the ribbon cable,

shown in Fig. 20 on page 18. When you remove the LCD, be sure to take

note of how both the ribbon cable and LCD power cable are threaded

through the case openings so you can later properly thread the wiring of the

new replacement LCD.

Once the LCD front panel is removed from the case, you will find the LCD is

attached to it with 4 screws as shown in Fig. 21 on page 18. Remove the

original LCD from the front panel; make note of the orientation of the LCD.

Install the replacement LCD in its place, be sure it is oriented correctly and

properly aligned. Correctly thread the LCD power wire and ribbon cable

through the case openings and plug them in. The power wire will plug into

CN605 the 2-pin white connector you installed earlier and shown in Fig. 13

on page 13.

produced by: glitchscience.com