Yamaha IPA8200 Manuel du propriétaire - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Yamaha IPA8200. Yamaha IPA8200 19 pages. Yamaha power amplifier owner's manual

Imprimer la page

Thank you for purchasing the Yamaha IPA8200 power ampliﬁer.

In order to take full advantage of the IPA8200's functionality and to ensure trou-

ble-free operation, please read this owner's manual carefully before use.

After you have read the manual, keep it in a safe place for reference when needed.

Features

■ Space-saving high-efﬁciency multi-channel 200W@4Ω x 8 power ampliﬁer

■ Switchable between STEREO/PARALLEL/BRIDGE modes as needed for

your application

■ Euroblock input jacks and barrier strip output jacks for easy installation

■ High-pass ﬁlter with switchable cutoff frequency (20 Hz / 55 Hz)

■ Input sensitivity / gain select switch switchable between three positions

(+4 dBu, 26 dB, 32 dB)

Precautions when rack-mounting the unit

Operation of this device is guaranteed for an environmental temperature range of 0 – 40°C. If you are mounting

only this device in an EIA standard rack, you may mount multiple units without leaving a space between them. If

you are mounting this device along with other types of device in an EIA standard rack, the ambient temperature

inside the rack may rise due to heat produced from the other devices, preventing this device from performing as

designed. To ensure that heat does not build up inside this device, you must observe the following conditions when

mounting it in a rack.

• If you mount this device in a rack together with heat-generating devices such as power amps made by other com-

panies, you must leave 1U or more space between this device and other devices. You should also install a ventila-

tion panel in this space or leave it open to ensure adequate ventilation.

• Leave the back of the rack open, and allow 10 cm or more distance between the rack and the wall or ceiling to

ensure adequate ventilation. If you are unable to leave the back of the rack open, you must install a commercially

available fan kit or other forced air circulating system to the rack. If you have installed a fan kit, there may be

cases in which closing the back of the rack will provide better cooling. For details, refer to the instructions that

came with the rack system or fan kit.

Introduction

IPA8200 Owner's Manual