Clark Synthesis TACTILE SOUND AQ339 Aquasonic Manuel d'installation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Clark Synthesis TACTILE SOUND AQ339 Aquasonic. Clark Synthesis TACTILE SOUND AQ339 Aquasonic 12 pages. Underwater speaker
Également pour Clark Synthesis TACTILE SOUND AQ339 Aquasonic : Manuel complémentaire (4 pages), Spécifications (1 pages), Liste des pièces (1 pages), Manuel de l'utilisateur (1 pages), Fiche de référence (1 pages), Manuel d'installation (3 pages), Spécifications (1 pages), Manuel d'installation (20 pages)

The speaker is buzzing:

•

In-wall installation: Insure the lock tab is properly inserted behind the lock tab receiving plate.

•

Drop-in use: Insure the speaker is not vibrating against the pool wall.

The speaker stopped working:

•

If the speaker stops playing, it is likely that the built-in protection circuit has activated. In the event

this happens, turn the amplifier off for approximately 60 seconds to allow the circuit to reset. Turn

down the volume on the stereo system and amplifier. Operate the system at lower volume levels

to avoid overloading the speaker.

•

If the speaker still does not play, check to insure all wiring connections are properly connected and

that output is coming from the audio system.

The speaker has low output:

•

Check the amplifier/receiver output settings to insure they are properly set.

•

If you are using a DVD/CD/MP3 player, insure the output volume is set correctly.

For additional questions/concerns/issues, contact Clark Synthesis or check our web

site.

MANUFACTURER CONTACT INFORMATION:

Clark Synthesis, Inc.

Phone: 303-797-7500

Fax: 303-797-7501

Web: www.clarksynthesis.com

www.clarksynthesis.com

TROUBLESHOOTING

Underwater Speaker