- ページ 11

スピーカー Clark Synthesis TACTILE SOUND AQ339 AquasonicのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Clark Synthesis TACTILE SOUND AQ339 Aquasonic 12 ページ。 Underwater speaker
Clark Synthesis TACTILE SOUND AQ339 Aquasonic にも： 補足マニュアル (4 ページ), 仕様 (1 ページ), パーツリスト (1 ページ), ユーザーマニュアル (1 ページ), 参考資料 (1 ページ), インストレーション・マニュアル (3 ページ), 仕様 (1 ページ), インストレーション・マニュアル (20 ページ)

ページを印刷する
Clark Synthesis TACTILE SOUND AQ339 Aquasonic インストレーション・マニュアル
The speaker is buzzing:
•
In-wall installation: Insure the lock tab is properly inserted behind the lock tab receiving plate.
•
Drop-in use: Insure the speaker is not vibrating against the pool wall.
The speaker stopped working:
•
If the speaker stops playing, it is likely that the built-in protection circuit has activated. In the event
this happens, turn the amplifier off for approximately 60 seconds to allow the circuit to reset. Turn
down the volume on the stereo system and amplifier. Operate the system at lower volume levels
to avoid overloading the speaker.
•
If the speaker still does not play, check to insure all wiring connections are properly connected and
that output is coming from the audio system.
The speaker has low output:
•
Check the amplifier/receiver output settings to insure they are properly set.
•
If you are using a DVD/CD/MP3 player, insure the output volume is set correctly.
For additional questions/concerns/issues, contact Clark Synthesis or check our web
site.
MANUFACTURER CONTACT INFORMATION:
Clark Synthesis, Inc.
Phone: 303-797-7500
Fax: 303-797-7501
Web: www.clarksynthesis.com
www.clarksynthesis.com
TROUBLESHOOTING
11
Underwater Speaker