Clarke 7640300 Manuel d'utilisation et d'entretien - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke 7640300. Clarke 7640300 13 pages. 12v cordless tyre inflator
NOTE: The unit will default to the last tyre pressure set. You can then
adjust this using the '-' or '+' buttons.
3. Press the Power Switch to 'ON'.
4. The tyre inflator will now inflate your tyre to the pre-set pressure and switch
off automatically when the pressure is reached. Towards final inflation, the
tyre pressure display reading will be slightly higher than the selected
pressure. When the tyre inflator stops, the final reading will be the selected
pressure. This is a normal function of the unit.
5. Switch OFF the tyre inflator and remove the tyre valve connector from the
tyre valve, returning the hose to its storage position.
IMPORTANT: The '-' or '+' buttons should never be pressed while the tyre
inflator is running.
If you leave the tyre inflator connected to the 12V supply but do not inflate the
tyre, after a few minutes the Digital Display will switch off. To turn back on,
press the Pressure Format Select Button.
• When inflating tyres with normal "Schrader" valves, no adaptors need to
be fitted to the hose.
• Presta valves require the adaptor to be screwed onto the valve before
attaching the hose.
6. Avoid inflating the objects above the recommended inflation pressure. This
could lead to damage and /or injuries.
MAINTENANCE
Keep the tyre inflator free of dirt and dust as far as possible. Wipe with a clean
cloth or blow it down with compressed air at low pressure. Do not use cleaning
agents or solvents as these may be aggressive to the plastic parts. Ensure that
no water can get into the interior of the tyre inflator
Your CLARKE tyre inflator has been designed to give long and trouble free
service. If, however, having followed the instructions in this booklet carefully,
you encounter problems, take the tyre inflator to your local CLARKE dealer.
The car adaptor incorporates a 15A fuse which can be replaced by
unscrewing the end of the plug.
Store the tyre inflator in a dry location.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
9