Clarke 7640300 Manuel d'utilisation et d'entretien - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke 7640300. Clarke 7640300 13 pages. 12v cordless tyre inflator
Imprimer la page
USING THE TYRE INFLATOR
1. Always inspect the tyre inflator before use to ensure the high pressure hose
is in good condition.
2. Connect the air hose to the tyre
inflator by screwing the hose into
the end of the tyre inflator.
3. Connect the other end of the air
hose to the valve stem of the item
you are inflating.
• An adaptor is supplied for inflating
sport balls including soccer,
basketballs and footballs.
NOTE: When inflating items of 10
PSI or less, inflate in short bursts and check after each burst by
feel or with a calibrated measuring device to determine
accurate pressure. Pressure required for most sports balls is too low
for accurate reading on tool gauge.
4. Connect power to the tyre inflator using options on page 6.
• The manufacturer set pressure is 35 PSI and this tyre inflator has memory
function. The gauge will indicate units and value.
5. Press "SET" button to choose the
desired unit (PSI,BAR,KPA,kg/cm
6. Press "-" or "+" button to choose
the desired value. Press and hold
"-" or "+" button will accelerate
numerical change. After the
screen flashes three times, the
screen will show "0" and the
system will enter the chosen unit.
7. Press the On/Off trigger to start
and hold for continuous working.
• The built-in LED light is on during
inflation.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
2
).
7