- ページ 7

電動工具 Clarke 7640300のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke 7640300 13 ページ。 12v cordless tyre inflator

USING THE TYRE INFLATOR

1. Always inspect the tyre inflator before use to ensure the high pressure hose

is in good condition.

2. Connect the air hose to the tyre

inflator by screwing the hose into

the end of the tyre inflator.

3. Connect the other end of the air

hose to the valve stem of the item

you are inflating.

• An adaptor is supplied for inflating

sport balls including soccer,

basketballs and footballs.

NOTE: When inflating items of 10

PSI or less, inflate in short bursts and check after each burst by

feel or with a calibrated measuring device to determine

accurate pressure. Pressure required for most sports balls is too low

for accurate reading on tool gauge.

4. Connect power to the tyre inflator using options on page 6.

• The manufacturer set pressure is 35 PSI and this tyre inflator has memory

function. The gauge will indicate units and value.

5. Press "SET" button to choose the

desired unit (PSI,BAR,KPA,kg/cm

6. Press "-" or "+" button to choose

the desired value. Press and hold

"-" or "+" button will accelerate

numerical change. After the

screen flashes three times, the

screen will show "0" and the

system will enter the chosen unit.

7. Press the On/Off trigger to start

and hold for continuous working.

• The built-in LED light is on during

inflation.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]