Clarke CCRT266 Manuel d'utilisation et d'entretien - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke CCRT266. Clarke CCRT266 17 pages. Cordless rotary tool kit

Imprimer la page

Clarke CCRT266 Manuel d'utilisation et d'entretien

OPERATING INSTRUCTIONS

OPERATING THE ROTARY TOOL

WARNING: BEFORE OPERATING THE ON/OFF SWITCH, MAKE SURE THAT

THE COLLET AND ACCESSORIES HAVE BEEN CORRECTLY AND SECURELY

FITTED.

1. To switch the rotary tool on, rotate the

speed control away from 0.

2. Select a suitable speed using the

speed controller.

• The low speed settings should be

used for removing rust, and

polishing.

• The medium speed settings should

be used for drilling, engraving,

sharpening and removing paint.

• The high speed settings should be used for cutting metal and sanding wood.

3. To switch the rotary tool off, set the speed control to 0.

WARNING: ALWAYS WAIT FOR COMPLETE RUN DOWN, AND THE

ACCESSORY TO STOP ROTATING, BEFORE PUTTING THE ROTARY TOOL

ASIDE.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]